A chamfer tool is a specialist tool to help with quickly forming
chamfers
on a square edge or corner.
There are a few different chamfering tools available, these include:
Chamfer shaves or chamfer spokeshaves have been produced for well
over 100 years and are still available to buy new today.
Edward Preston chamfer shaves
were some of the earlier and more interesting of the iron shaves.
Stanley was another of the very early and long running iron chamfer
spoke-shave makers with its
Stanley 65 chamfer shave
Later came the Union 111 chamfer shave, the
Record A65 chamfer shave
and more recently the
Kunz chamfer spokeshave.
Chamfer shaves usually have adjustable fences. The fences allow
any through or stopped chamfer to be produced and repeated evenly
and uniformly.
There are a few different chamfer planes out there which tend to
be antique (over 100 years) in age. The most common chamfer planes
which are seen are old wooden chamfer planes.
There is also the
Stanley 72 plane
which is an iron chamfer plane.
There are a few woodworking planes which have an additional attachment
for forming chamfers.
One such plane is the
Veritas block plane
which has the option of
fitting the Veritas chamfer attachment to it.
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."