Stanley 13-050 Review By: I.Ball
Category: Old Multi Planes
Manufacturer: Stanley
Plane Type: Combination
Model No: 13-050
The Stanley combination plane number 13-050 forms a plane with the most
functionality in this series of Stanley combination / plough / plow
planes.
The other two planes in this range of plane are the
Stanley 13-030 plough / plow plane
and the Stanley 13-052 plough / plow plane.
This range of planes were developed to take the reign from the
Stanley 50 combination plane
and the
Stanley 50S plough / plow plane
as the next generation of Stanley combination / plough / plow planes.
The Stanley 13-050 combination plane has a nickel plated cast iron body
with a single brown plastic handle at the rear of the plane.
The 13-050 was supplied with 18 cutters, 2 arms, 2 spurs, a depth stop and a
Stanley 13-050 instructions booklet.
This Stanley combination plane was supplied with the following cutters:
Plough (Imperial): 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 7/8"
Plough (Metric): 4mm, 6mm, 9mm, 12mm
Beading: 1/8", 3/16", 1/4", 3/8", 1/2"
Tongue: 1/4"
The 13-050 plane allows cuts to 19mm (3/4 inch) deep with the ability to make
cuts up to 5 inches from the edge of the work piece.
The cutters were supplied in a yellow wallet with clear pockets.
The Stanley 13-050 plough plane was presented in a yellow and black
Stanley cardboard box with an image of the plane on the top of the box.
Body:
cast iron
Fence:
cast iron
Cutters:
best steel
Handle:
plastic composite
Finish:
nickel plate
Owners of the Stanley 13-050 combiantion plane had the option of buying the following
extra cutters:
Tongue: 1/8", 3/16"
Fluting: 3/16", 1/4", 3/8", 1/2"
Sash: 1 1/2"
<1974 - 1986>
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you use info such as dates, sizes, details from FindMyTool.co.uk for certain online
auction sites, forums, video footage, websites and any other forms of media,
please kindly give credit to this site and spread the word so others know
where to find the information.
Please see our terms if using more than a few dates
or details.