Stanley 5061 Gauge Review By: I.Ball
Category: Old Marking Gauges
Manufacturer: Stanley
Tool Type: Marking Gauge
Model No: 5061
The Stanley marking gauge number 5061 is a wooden gauge with a single
marking pin.
The Stanley 5061 gauge is made from beech.
The wooden head is secured to the stem in the required position with
the use of a plastic amber thumb screw.
The Stanley 5061 marking gauge was designed to be used either right-handed
or left-handed.
This Stanley tool formed part of Stanley's '5000' series tool range.
The popular Stanley 5061 marking gauge was a modernisation and reinvention of
the earlier
Stanley 61 marking gauge.
"Stanley 5061, Reg design no.942901, made in England" - found on the bottom end of the stem.
<1974 - 1986>
Stanley Scribing Gauge No. 5061
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you use info such as dates, sizes, details from FindMyTool.co.uk for certain online
auction sites, forums, video footage, websites and any other forms of media,
please kindly give credit to this site and spread the word so others know
where to find the information.
Please see our terms if using more than a few dates
or details.