Stanley Rebate Plane - No. 190

stanley fillister plane
Our Rating

Stanley 190 Review By: I.Ball

Manufacturer: Stanley

Plane Type: Fillister Rebate / Rabbet

Model No: 190


Please see the Stanley 191 review for the core details of this plane type other than the width.

The Stanley 190 rebate plane was the widest of a series of three planes in the range with a width of 38mm (1 1/2 inch).

Slightly strangely with the numbering, the lower number in the series (Stanley 190) is the widest plane, with the highest number (Stanley 192) in the series being the narrowest of the three planes.

stanley 190 plane

Plane Construction

Body and frog:
cast iron

Lever cap:
cast iron

best steel

Plane finish:

Plane Dimensions

8 inch

38mm (1 1/2 inch)

kg( lbs)

Plane Markings

"Stanley" - found on the flat plane side.

"No 190, Stanley, Made In USA" - found on the plane side behind the cutter.

Manufactured Dates

<1898 - 1958>

stanley 190 plane
stanley 190 plane
stanley 190 plane

stanley 190 plane


(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given in good faith, any such information should not be solely relied upon and seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing and evolving including corrections, there is scope for error and shouldn't be fully relied upon, please confirm any details for yourself by performing additional research from reliable sources.

Use Of Content

Enjoy viewing the encyclopedia of tools.

If you use info such as dates, sizes, details from for certain online auction sites, forums, video footage, websites and any other forms of media, please kindly give credit to this site and spread the word so others know where to find the information.

Please see our terms if using more than a few dates or details.


Your AD Here

Copyright © All rights reserved