Veritas Block Plane Chamfer Guide


The Verdict
Veritas Chamfer Attachment Review By: I.Ball
Category: Plane Spare Parts
Manufacturer: Veritas
Tool Type: Chamfer Attachment
Model No: N/A
This Veritas
chamfer
guide attachment review is about the chamfer attachment
suitable for the
Veritas low angle block plane
and the
Veritas standard block plane.
The Veritas chamfer guide attachment is made from anodized aluminium
with a black finish which matches the Veritas low angle and standard
block planes colours.
The attachment is a great tool for adding a chamfer to edges and corners.
The optional chamfer attachment holds the plane at a constant 45 degree
angle to the piece of work and is adjustable to 13mm (1/2 inch) wide.

The attachment is easily fitted by unscrewing the front brass knob on
either the low angle or standard Veritas block plane and then replacing
the adjustable mouth piece with the chamfer attachment (and then refitting
the brass front knob to secure the chamfer guide in position).
Adjustments to the guide should be made before fitting the chamfer guide.
For more general chamfer tool information see the
'what is a chamfer tool?' article.
The Veritas block plane chamfer attachment is produced by Veritas Tools
Inc. of Canada.
Plane Part Markings

"Veritas, Made In Canada, US PAT D474,955" - found on one of the wings.
Manufactured Dates

? - current day
Plane Part Also Known As

Veritas Chamfer Guide
Veritas Chamfering Attachment
Veritas Chamfer Part
Veritas Block Plane Chamfer Tool
References
- Veritas Tools Inc.
Disclaimer
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given
in good faith however any such information should not be solely relied upon and should not be seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines.
Refer to disclaimer note (i) for information on safety, as well as the
good health of your tool.
In addition refer to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't
be fully relied upon, please be aware the details may also become out of date due to manufacturer
changes to the product, please confirm any details for yourself by performing additional
research from reliable sources.
Use Of Content
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
Readers Pick
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."