Henry Taylor Cranked Paring Chisel Review By: I.Ball
Category: Cranked Chisels
Manufacturer: Henry Taylor Tools
Tool Type: Cranked Chisel
Model No: Paring
This Henry Taylor Cranked Paring Chisel review covers the Cranked Paring Chisel
produced by Henry Taylor Tools of Sheffield, England.
The Henry Taylor Cranked Paring Chisel is a long-standing traditional woodwork chisel with a long length slender blade which is cranked at the shaft.
The cranked shaft design results in the blade staying absolutely flat on the stock at all times.
The blade's bevelled sides making this tool ideal for paring work as well as allowing access to difficult corners.
The Henry Taylor Cranked Paring Chisel is available in sizes ranging from
1/4" (6mm) - 1" (25mm).
The length of these blades are approximately 200mm - 220mm.
The blades are sold sharp, ready to use out of the packet, some very minor sharpening may be needed.
These chisels are made from the long standing Henry Taylor Tools who have been making hand tools since 1834.
The chisels are made using traditional techniques coupled with modern heat treatment and finishing techniques with the blade being carefully forged, correctly hardened and tempered to give a blade that holds a good edge.
The chisel is fitted with a darkly finished hardwood handle with a contrasting bright
brass ferrule. The handle is given the red Henry Taylor 'Diamic' brand sticker which
sits richly against the dark handle.
These cranked chisels are made by hand through a series of processes and not in a factory conveyor belt production machine / drop stamping mould. They may vary, very slightly from chisel to chisel due to the traditional way in which they are made.
Knowing the history and knowing by buying this tool you are keeping this history and traditional craftsmanship going really adds an extra aura to the tool each time you use it.
Having been to the Henry Taylor factory, I can safely say the tools are made using old techniques, traditional tools and old machinery with the glowing molten metal being bashed by a worker wearing thick round goggles, Henry Taylor are keeping the golden age of Sheffield tool making alive.
Usually supplied in a plastic sleeve.
Henry Taylor Cranked Paring Chisel Product Codes: F27, F28, F29, F30.
* Important: please refer to the 'disclaimer' at the foot of this review.
* Wearing safety clothing and eye protection is usually a good idea to help protect against injury.
- This tool has sharp parts, take suitable precautions when using/handling/storing the tool to prevent injury.
? - Today
- Henry Taylor Tools.
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given in good faith however any such information should not be solely relied upon and should not be seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to disclaimer note (i) for information on safety, as well as the good health of your tool. In addition refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't be fully relied upon, please be aware the details may also become out of date due to manufacturer changes to the product, please confirm any details for yourself by performing additional research from reliable sources.
Enjoy viewing the encyclopedia of tools.
If you use info such as dates, sizes, details from FindMyTool.co.uk for certain online auction sites, forums, video footage, websites and any other forms of media, please kindly give credit to this site and spread the word so others know where to find the information.
Please see our terms if using more than a few dates or details.