Review By: I.Ball
Category: Old Tape Measures
Manufacturer: Stanley
Tool Type: Tape Measure
Model No: 1206
The Stanley 1206 tape measure is a push-pull tape measure with a metal case.
The tape is measured in increments of inches with 1/16 inch increments
and 1/32 inch increments.
The top of the tape case is marked 'Stanley No. 1206, 6 Feet, Add 2 inches
for inside measure'.
The tape is marked on the rear 'Made In England'.
Case:
steel
Tape:
steel / alloy
? - ?
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."