Sandvik 266 Saw Review By: I.Ball
Category: Old Hand Saws
Manufacturer: Sandvik
Tool Type: Hand Saw
Model No: 266 - Master Craftsman
The Sandvik Master Craftsman saw number 266 is a Swedish saw made with a Swedish
steel blade and a sleek lined hardwood handle.
Swedish tool steel is regaded in similar high esteem as to Sheffield
tool steel.
The 266 handle is secured to the blade with the use of four steel/alloy
buttons including one which is faced with a 'Sandvik' medallion.
The buttons require a phillips screwdriver to adjust opposed
to most UK / US saws which require a flat-head screwdriver (or split-nut
screwdriver for older saws).
The Sandvik saw shown is 22 inches in length and has 10 teeth per inch (tpi).
There were different lengthed and tpi versions of this saw produced.
The sleeve says 'Sandvik, 266, Made In Sweden, Master Craftsman', 'Traditional
wood handle, Swedish quality steel, Skew back' and '9T = 10P, 22" = 550mm'
Handle: Beech
Number Of Buttons: 4
Type Of Buttons: Steel, Button
Blade Markings:
? - ?
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."