Rabone 1119 Rule Review By: I.Ball
Category: Old Rules
Manufacturer: Rabone
Tool Type: Architects Rule
Model No: 1119
The Rabone Architects Folding Rule No. 1119 is an old Rabone folding
rule made from Boxwood with brass hinges and protective parts.
The markings on this rule are 'Boxwood, Rabone, Made In England, No. 1119'.
The Rabone 1119 rule is marked out in inches on both sides up to 36"
(3ft) long overall.
The inside of the rule is bevelled with various finer measurements.
<1958>
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."