Pax Jewellers Saw
The Verdict
Pax Jewellers Saw Review By: I.Ball
Category: New Special Saws
Manufacturer: Thomas Flinn & Co.
Tool Type: Jewellers Saw
Model No:
The Pax Jewellers Saw is manufactured by Thomas Flinn & Co. of
Sheffield, England.
This saw has a super thin alloy steel blade, a fine tooth setup which
have been given no set making this saw ideal for cutting small soft
metal workpieces.
The Pax Jewellers Saw has a small, detailed Pax etching on the saw blade.
The saw blade has a brass mirror polished spine.
The length of the blade is 152mm (6"), with 20tpi (teeth per inch).
The Pax Jewellers Saws are fiited with a Walnut handle which is finished with a
brass ferrule.
This Pax saw forms part of the extensive range of Pax saws which includes the Pax
Dovetail Saw, Pax Tenon Saw, Pax Hand Saw, Pax Gents Saw and a number of specialist
saws such as the Pax Guitar Saw.
Usually supplied in a blister packet.
Cautions / Notes
* Important: please refer to the 'disclaimer' at the foot of this review.
* Wearing safety clothing and eye protection is usually a good idea to help protect against injury.
- This tool has sharp parts, take suitable precautions when using/handling/storing the tool to prevent injury.
Dimensions
Blade Length - 152mm (6")
Teet Per Inch - 20 tpi
Manufactured Dates
2000 - Today
History / Updates
Pre-2017 - The jewellers saw handle was made from Rosewood.
2017-Today - The jewellers saw handle was made from Walnut.
Pre-2019 approx. - The jewellers saw was supplied in a dark blue blister packet.
2019-Today - The jewellers saw was supplied in a brown blister packet.
References
- Thomas Flinn & Co.
Disclaimer
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given
in good faith however any such information should not be solely relied upon and should not be seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines.
Refer to disclaimer note (i) for information on safety, as well as the
good health of your tool.
In addition refer to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't
be fully relied upon, please be aware the details may also become out of date due to manufacturer
changes to the product, please confirm any details for yourself by performing additional
research from reliable sources.
Use Of Content
Enjoy viewing the encyclopedia of tools.
If you use info such as dates, sizes, details from FindMyTool.co.uk for certain online
auction sites, forums, video footage, websites and any other forms of media,
please kindly give credit to this site and spread the word so others know
where to find the information.
Please see our terms if using more than a few dates
or details.