Review By: I.Ball
Category: Old Tenon Saws
Extra Info: What is a Tenon Saw? Tenon Saw Videos
Manufacturer: Drabble And Sanderson
Tool Type: Tenon Saw
Model No:
This steel backed Drabble And Sanderson tenon saw has a Beech handle
fitted with 3 steel button screws which are used to secure the
handle with the blade.
The saw has a steel back; the spine is fitted with a heavy piece
of steel which gives the saw weight and decorative properties.
The left face of the steel back is marked with the inscriptions
'Drabble & Sanderson, Sheffield, Warranted Cast Steel'.
The saw shown is 14 inches in length and has 12 teeth per inch (tpi).
There were different lengthed and tpi versions of this saw produced.
Handle: Beech
Number Of Buttons: 3
Type Of Buttons: Steel, Button
Steel Back Markings:
'Drabble & Sanderson, Sheffield, Warranted Cast Steel'
Blade Markings:
..1941..
For information on dating this saw and other British saws, see the
'British Saws and Saw Makers from c1660' book, written by Simon Barley.
The book is the most comprehensive saw directory to date listing makers, makers
marks and manufacturing dates. There is also a whole host of additional information
on the history of saw making, how to date a saw, in depth details
on each of the large makers and much more, making for the most interesting read
and leaving you with a slight desire to buy an old British saw.
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."