Reviewed By: I.Ball
Manufacturer: Smallwood
Tool Type: Level
Model No: 757
The I&D Smallwood level number 757 is a small, two bubble level made from boxwood
with a brass window, a brass circular bubble stopper and brass ends.
Both sides of the 757 level can be used as a ruler; the sides are marked
out in inches up to 8 inches long overall with finer 1/16 inch incremental
measurements in-between.
One side of the level also
bears the makers mark:'I&D Smallwood, Makers, B'Ham. Eng.' and 'No. 757'.
Material:
boxwood
Fittings:
brass
Length:
8 inch
No. of bubbles:
2
Markings:
'I&D Smallwood, Makers, B'Ham. Eng.', 'No. 757' and an 8 inch ruler either side
? - ?
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."