Record Block Plane - No. 019

record 019 plane
Our Rating

Record 019 Plane Review By: I.Ball

Manufacturer: Record

Plane Type: Block

Model No: 019


           

The Record 019 block plane is part of the Record knuckle block plane range.

The Record 019 is almost identical to the Record 018 plane with the main difference being the 019 is 7 inches long in contrast to the 018 being 6 inches in length. Other minor differences include the weight and the plane markings.

Another difference between the two planes on a historical sense is the 019 had a much shorter production run of approximately 9 years in the 1930's to early 1940's. The output of this production may have further been reduced when consideration is taken to the fact World War II started in 1939.

To see the core details of this plane (other than plane length, weight and markings) refer to the Record 018 plane review.



Plane Construction

record plane 019

Length Of Sole: 178mm (7 inch)

Front Knob: alloy

Body: high grade cast iron

Lever Cap: high grade cast iron

Weight: 737g (1 5/8lb)

Plane Finish: blue


Record 019 Plane Blade / Cutter

Material: crucible cast tungsten steel

Width: 42mm (1 5/8 inch)


record plane 019

Record 019 Plane Markings

"Record" - found on the top face at the very front of the plane

"Record No 019" - found on the top face of the front knob

"Made in England" - found on the top face at the rear of the plane

"Record, Made In England" - found on the lever cap face



Manufactured Dates

1934 - 1943





















Disclaimer

(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given in good faith, any such information should not be solely relied upon and seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing and evolving including corrections, there is scope for error and shouldn't be fully relied upon, please confirm any details for yourself by performing additional research from reliable sources.




Use Of Content


Enjoy viewing the encyclopedia of tools.

If you are inspired by our content or use info such as dates, sizes, details from FindMyTool.co.uk please kindly give credit where credit is due via giving a nod in a video or a link to this website.

Please see our terms if using more than a few dates or details.


Advertise

Your AD Here



Copyright © findmytool.co.uk All rights reserved