Veritas Precision Square Review By: I.Ball
Category: Squares
Manufacturer: Veritas
Tool Type: Square
Model No's: Precision
The Veritas Precision Square review includes photos and information
about the precision square manufactured by Veritas Tools of Canada.
The Veritas Precision Square is a highly accurate square made to the
accuracy of an engineer's square (' 0.001" per inch of length ') available
in imperial measurements or metric measurements.
The square is made from chrome plated high carbon steel.
Veritas have designed this square with a little notch on the interior
right angle to help ensure the square seats well.
The measurement markings have been etched and then filled with black finish to make
the measurements easy to see.
The square is marked 'Veritas, Innovation in tools, Made in USA'.
The Veritas Precision Square is thin and lightweight, it is smaller enough to fit
in most pockets, it can be used as an accurate square and rule.
Arm Width:
20mm (2cm)
Short Arm Length:
80mm (8cm)
Short Arm Graduations:
0.5mm
Long Arm Length:
150mm (15cm)
Long Arm Graduations:
1mm
Arm Width:
3/4"
Short Arm Length:
3"
Short Arm Graduations:
1/32"
Long Arm Length:
6"
Long Arm Graduations:
1/16"
<1999 - Today
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
- Veritas Tools
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given
in good faith however any such information should not be solely relied upon and should not be seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines.
Refer to disclaimer note (i) for information on safety, as well as the
good health of your tool.
In addition refer to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't
be fully relied upon, please be aware the details may also become out of date due to manufacturer
changes to the product, please confirm any details for yourself by performing additional
research from reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."