Veritas Cabinet-maker's Trimming Plane Review By: I.Ball
Category: Specialist Planes
Plane Type: Cabinetmaker's Trimming
Model No: N/A
This Veritas Cabinet Makers Trimming Plane review covers the plane made by Veritas
Tools of Canada.
The Veritas Cabinet Makers Trimming Plane is what appears to be Veritas Tools updated take on the Stanley Cabinet Makers Edge Plane No. 97, also referred to as a 'Chisel Plane' and traditionally referred to as a 'Piano Makers Plane'.
With the name 'Chisel Plane', this plane effectively combines the ability of a plane and a wide bevel edge chisel to offer a highly controlled cut.
The plane is made from ductile cast iron with an angled hardwood knob and solid brass parts.
The plane body is 165mm (6 1/2") long by 44mm (1 3/4") wide.
The Veritas Trimming Plane is supplied with a full width 44mm (1 3/4"), O1 steel bevel plane blade.
The blade has a 20 degree bevel which when set on the low angle 15 degree bed it gives a 35 degree cutting angle.
The Veritas Cabinetmakers Trimming Plane has a blade depth adjuster which is controlled by the large brass nut located at the top of the blade.
Supplied in a Veritas cardboard box.
* Important: please refer to the 'disclaimer' at the foot of this review.
* Wearing safety clothing and eye protection is usually a good idea to help protect against injury.
- The blade(s)/cutter(s) is very sharp, take suitable precautions when using/handling/storing
the plane/cutter(s) to prevent injury.
- Failure to loosen parts when making adjustments to the plane can result in damage to the plane such as cross-threading screw threads. Never force a part to move.
- Overtightening parts can cause damage to the plane and the plane threads.
stress-relieved ductile cast iron
Blade Adjuster: brass
165mm (6 1/2 inch)
44mm (1 3/4 inch)
0.544kg (1.2 lb)
Veritas Cabinet Makers Trimming Plane Blade / Cutter
Width: 44mm (1 3/4 inch)
"Veritas Canada" - found on the top face of the rear of the plane.
2014 - Today
Veritas Chisel Plane
Veritas Piano Makers Plane
Veritas Edge Trimming Plane
The Veritas Cabinet Makers Trimming / Chisel Plane - News Updates / Historical Updates:
2014-2018 - The plane knob wa made from Bubinga (sometimes referred to as African rosewood).
2018-Today - The plane knob was made from what was simply advertised as 'hardwood'.
- Veritas Tools Inc.
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given in good faith however any such information should not be solely relied upon and should not be seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to disclaimer note (i) for information on safety, as well as the good health of your tool. In addition refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't be fully relied upon, please be aware the details may also become out of date due to manufacturer changes to the product, please confirm any details for yourself by performing additional research from reliable sources.
Enjoy viewing the encyclopedia of tools.
If you use info such as dates, sizes, details from FindMyTool.co.uk for certain online auction sites, forums, video footage, websites and any other forms of media, please kindly give credit to this site and spread the word so others know where to find the information.
Please see our terms if using more than a few dates or details.