Review By: I.Ball
Category: Old Smoothing Planes
Extra Info: What is a Smoothing Plane? Smoothing Plane Videos
Manufacturer: Millers Falls
Plane Type: Smoothing
Model No: 10
The Millers Falls smoothing plane number 10.
The plane was fitted with a Rosewood (or exotic wood) rear handle and
front knob, a Millers Falls lever cap, cap iron and plane blade.
The plane had a machined and ground sole and sides with a black finish
on the top side of the body.
The frog on this plane was red.
"Millers Falls" - found on the lever cap face
"Made In USA" - found on the top face in front of the rear handle
"Millers Falls No 10" - inscribed on one side of the plane
? - ?;
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving including corrections, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."