Millers Falls Hand Drill - No. 2

millers falls hand drill 2
Our Rating

           

Review By: I.Ball

Category: Old Drills

Manufacturer: Millers Falls

Tool Type: Hand Drill

Model No: 2


           

The Millers Falls hand drill number 2 is quite an early hand drill from the Millers Falls drilling tools range.

The 2 has the distinctive Millers Falls patterned wheel design with eight shaped spokes which look like legs running.

This drill was made with a hollow Rosewood handle with a screw-on lid. The purpose of this hollow handle is to store drill bits inside. There is also a small knob on the wheel which is also made from Rosewood.

The cranked winding handle is marked 'Millers Falls, 00 no.2 Millers Falls Mass USA'.



millers falls hand drill number 2

millers falls hand drill no 2

Manufactured Dates

? - ?


Your Say

....

Do you have a question/answer or something to share about this tool?
Please Contact Us





















Disclaimer

(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given in good faith, any such information should not be solely relied upon and seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing and evolving including corrections, there is scope for error and shouldn't be fully relied upon, please confirm any details for yourself by performing additional research from reliable sources.




Use Of Content


Enjoy viewing the encyclopedia of tools.

If you are inspired by our content or use info such as dates, sizes, details from FindMyTool.co.uk please kindly give credit where credit is due via giving a nod in a video or a link to this website.

Please see our terms if using more than a few dates or details.


Advertise

Your AD Here

Readers Pick


"Just stumbled across your website and an absolute treasure trove of information. I was recently given an old Stanley 110 block plane and wanted to know more about it. Your website told me everything I needed to know.

But there is so much more to read. I forsee me spending a lot of time just reading page after page. I can appreciate how much time this will have taken to put together.

I just wanted to let you know that your hard work is appreciated."




Copyright © findmytool.co.uk All rights reserved