I Sorby Swan Neck Mortice Chisels - 1

i sorby swan neck mortice chisels
Our Rating

           

Reviewed By: I.Ball

Manufacturer: I Sorby

Tool Type: Swan Neck Mortice Chisels

Model No:


           

The old I Sorby swan neck mortice chisels are fitted with a hardwood handle, in this case a boxwood handle.

There were a selection of sizes available, the one pictured has a cutting edge of 13mm (1/2 inch) with an overall length of 398mm.

The blade is marked with the marking 'I Sorby'.

This chisel is sometimes known as a mortice lock chisel.



Manufactured Dates

? - ?


Your Say

....

Do you have a question/answer or something to share about this tool?
Please Contact Us





















Disclaimer

(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given in good faith, any such information should not be solely relied upon and seen as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer to good safety practices for the safety of you and others. Refer to good practices for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing and evolving including corrections, there is scope for error and shouldn't be fully relied upon, please confirm any details for yourself by performing additional research from reliable sources.




Use Of Content


Enjoy viewing the encyclopedia of tools.

If you are inspired by our content or use info such as dates, sizes, details from FindMyTool.co.uk please kindly give credit where credit is due via giving a nod in a video or a link to this website.

Please see our terms if using more than a few dates or details.


Advertise

Your AD Here

Readers Pick


"Just stumbled across your website and an absolute treasure trove of information. I was recently given an old Stanley 110 block plane and wanted to know more about it. Your website told me everything I needed to know.

But there is so much more to read. I forsee me spending a lot of time just reading page after page. I can appreciate how much time this will have taken to put together.

I just wanted to let you know that your hard work is appreciated."




Copyright © findmytool.co.uk All rights reserved