Record Shoulder Rebate Plane - No. 072

record shoulder rebate plane
Our Rating
User Rating

The Verdict

Reviewed By: I.Ball


Manufacturer: Record

Plane Type: Shoulder Rebate

Model No: 072

The Record shoulder rebate plane number 072 has a shouldered blade which spans the full width of the plane. The blade is secured in place with the use of a curvacious lever cap which locks in place with the use of a securing wheel/screw underneath the lever cap.

The depth at which the blade cuts can be adjusted using the fine adjustment adjuster milled nut at the rear of the plane. The cutter on these planes are bed on a low angle.

The Record 072 plane has the advantage of having an adjustable mouth.



1.

Additional Information

record 072 plane

Removing The Blade: To remove the blade from the 072 plane, first of all the lever cap must be removed. The lever cap is removed by firstly loosening the securing wheel/screw on the underside of the lever cap then once loosened the lever cap can be lifted out from the plane. The blade can now be moved/removed.

To replace the blade the above process is reversed; care should be taken to ensure the blade is carefully placed in position to ensure no damage/dulling occurs to the edge of the blade.

When placing the blade into the plane the bevel side of the cutter goes upwards, at the same time the hole at the top of the blade locates with the fine adjustment adjuster milled nut; this allows the fine adjuster to move the blade.

When using the fine adjuster the lever cap securing wheel/screw should first be loosened record 072 plane slightly; if it is not loosened the blade will be locked in place and as a result will not move, this can lead to cross-threading of the fine adjustment adjuster milled nut.


Adjusting The Mouth: The mouth of the Record 072 plane is adjusted by firstly loosening the locking-screw located on top of the plane at the front-end above the nose. The locking screw is loosened using a flat head screwdriver; the screw head is 1/2 inch).

The mouth can then be adjusted by turning the mouth adjusting screw located at the very front of the plane on the nose. The mouth screw is adjusted using a flat head screwdriver.

The locking screw should then be tightened once the required mouth width is found.


2.

Plane Construction

record 072 plane

Body:
high grade cast iron

Lever cap:
high grade cast iron

Blade (earlier models):
crucible cast tungsten steel

Blade (later models):
high quality tool steel

Plane finish (earlier models):
nickel plated

Plane finish (later models):
bright finish

Width: 1 inch (25mm)

Length: 8 1/8 inch

Weight: 3 1/4 lb

Cutter Width: 1 inch (25mm)


3.

Plane Markings

"Record No 072" - found on the left side of the plane towards the front.

"Made in England" - found on the right side of the plane towards the front.

4.

Manufactured Dates

1933 - 1943

5.

Your Say..

comments powered by Disqus



Use Of Content


Enjoy viewing the encyclopedia of tools.

If you use info such as dates or photos from FindMyTool.co.uk for certain online auction sites, forums, video footage, websites and any other forms of media, please spread the word so others know where to find the information.

Please see our terms if using more than a few dates or photos.


Popular Old Tool Reviews

Chesterman Tape Measure
Disston Saw D8
Marples Brace - Ultimatum
Rabone Square 1902
Record 09 1/2 Plane
Record Router 071
Record 405 Plane
Spear & Jackson Saw 88
Stanley 45 Plane
Stanley 50 Plane
Stanley 13-050 Plane
Stanley Router 71
Stanley Drill 803
Norris Plane A5
Sash Fillister Plane

Popular New Tool Reviews

Clifton Plane 4
Clifton Plane 7
Clifton Spokeshave 550
Joseph Marples Mortice Gauge T14
Joseph Marples Try Square
Pax Dovetail Saw 1
Veritas Block Plane DX60
Veritas Router Plane
Veritas Small Router
Veritas Spokeshave

terms & conditions | privacy | advertising | feedback | related resources | sitemap

Copyright © findmytool.co.uk All rights reserved